New 1000W Hot Air Welding Gun Pistol Plastic Welder Heat Gun Hot Gas Welder Kit

Description

Store category
Sign Up Now !
You may also like
New 1000W Hot Air Welding Gun Pistol Plastic Welder Heat Gun Hot Gas Welder Kit
Product Description
Name:Plastic Welder
Color:as pictures
Power:1000W
Rated Voltage:220V
Temperature Range:40-550℃
Wind Pressure:2800Pa
Air Volume:0.3 M3/m
Power Type:AC power supply
Rated Voltage Range:AC single phase and DC 50V and below
Type:Industrial hot air gun
Features
-Insulation performance: "gun core" "motor" and "gun shell" between the 1500V AC voltage (50HZ) after a minute without breakdown phenomenon.
-Temperature 20 degrees, the continuous use of 4 hours, the handle temperature is not higher than 30 degrees.
-The welding torch motor is DC low voltage (24V) motor, as long as connected to 220V AC, you can carry out welding operations, without air pump and pressure transformer with easy to use.
-No air pump and other equipment or engaged in high-altitude, long-distance plastic welding operations units, can buy spare. This product is most suitable for welding with a cross-sectional area of not more than 6 square millimeters of plastic welding.
-Applicable to the welding of plastic sheet, and the use of equipment repair, and at the same time for instruments, instruments, dust, moisture, motor drying. Is an indispensable tool for the production of chemical plastics.
Use And Precautions
-For the first time, there may be spitfire or smoke. This is a normal phenomenon, power will automatically disappear after 5 minutes.When the torch, please adjust the temperature to the lowest, until the barrel can be cooled before cooling, so as not to waste heat damage machine Pieces, affecting the service life.
-Plastic sheet is heated to 130-140 degrees when it becomes a soft state, a little pressure to shape the welding temperature is generally about 240 degrees, from the welding nozzle mouth about 5-10MM at the temperature of 200-260 degrees; welding should be Note the distance between the nozzle and the solder joint to obtain the desired soldering temperature.
-After the electric wire is broken, you can take the gun shell connection screw, remove the gun core, with the same specifications of the gun can be replaced.
-Welding torch with the complete light to light, so as not to break the gun part of the refractory porcelain material, leaving the electric wire short circuit.
Note
-Due to the manual measurement,there might be some error.
-If the welding electrode can not be found in the welding, or do not focus on the welding, it shows that the welding material and the electrode is not matching, and only the same material and the material can be fusin.
Package Included
1 x Plastic Welder
1 x Plastic Pipe
Payment
Shipping
Return policy
Contact us & Warranty
Working time
Payment
We accept PayPal only.
Payment must be received
within 7 business days
of auction closing.
We
ship to PayPal's address
only. Please make sure your address in EBAY can match with your shipping address on PayPal.
All major credit cards are accepted through secure payment processor PayPal.
TOTAL AMOUNT DUE includes the final auction price plus S&H (Shipping and Handling).
S&H will be determined based upon the ship to address.
PLEASE NOTE: S&H DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
Shipping
1. Item processing time. We will ship the products within 1-5 working days upon the confirmation of your cleared payment, when buyers have some special request (e.g.Voltage, color...etc.), we may delay to ship the orders and will inform buyers about it. Do please check your message box in 1-2 days after payment is cleared. Otherwise
order may be cancelled due to insufficient of your information.
2.Shipping methods. Items are shipped out via SpeedPAK or E-packet or any other shipping method that can fit your country, we will choose the reasonable
way for you.
3. Delivery time may vary with countries and international shipping for some countries may be much slower than expected. Also your local custom may delay the shipping a lot due to the custom duty they want to charged from you for importing this item from other countries.
Note: Any Import or export duties and the cost of dispatching for remote areas, will be borne by the buyer, because it is difficult to know all country's custom duty or remote area before shipping the item.
4. Please Note
buyers from some of the countries may need to contact us
before making payment.You may be requested to pay extra shipping cost charged by shipping company otherwise order may be cancelled automatically due to insufficient payment for shipping. We need to revise your invoice before your payment please...
Return policy
(1) Taking photos and sending it via eBay Message Box.
Missing item or get wrong item or damaged items, or the item seams can not work well, please keep all the items in original condition, make all the items together with packing, then take some photos of them and send us the photos by message box.
(2) How we will react? We will investigate the case and may send you the missing item or replacement or refund upon the situation of the case. (sometimes you may be requested to return the incorrect item).Or if it is not seller's error, buyer may need to cover the returning cost.
(3) Valid time for returning. Please contact us within 7 days upon receiving the package.All items must be returned within 30 days of purchasing the item.
Contact us & Warranty
Warranty: 3-24 months warranty is provided to our products. The length of the warranty depends on the nature of the products. Please contact us if you are wondering about how the warranty works for your item.
Contact: Do please contact us before leaving any negative feedback or Opening any kind of case. We promise to achieve your 100% satisfaction. But negative feedback actually can not solve any problem. Thank you so much for your kindness and understanding.
Working time
Beijing time :AM 8:00 -PM 8: 00